METZ CONNECT Analogværdi-giver KMAi-F8 fjederkraftklemme (110731)
FBAC4895-B52C-4E03-B099-A6A8F8B8017B Created with sketchtool. 706D6907-81E1-46A2-B8F9-7B702A1EF2C7 Created with sketchtool. 6A870209-E7F5-44F5-A66F-09E20C85A0DC Created with sketchtool. 0BB04D6C-A9AB-4913-BF4F-5A23954E68E1 Created with sketchtool. 501E26C7-66C1-4DAA-B740-6CFAF55A1B39 Created with sketchtool. C105F7D3-D5EE-43C9-9EE8-05CC42B296D4 Created with sketchtool. D94689D8-7CBB-41C8-AC06-F79D81FF82D5 Created with sketchtool. DA4C7ED9-2512-4D52-94F0-92800F2A6E04 Created with sketchtool. 42E133FD-828F-4CF4-A0BF-560014487A57 Created with sketchtool. F52D9745-4BFD-4506-BEEF-630FD09EF2D9 Created with sketchtool.
Fjernlager (14-21 hverdage)
Varen er på fjernlager, leveringstiden er 14-21 hverdage. Mere info
Leveringsmuligheder - Klik på en mulighed for at vælge
Fragtmand til kantsten.
199,00
Afhentning i vores Pick-up point i Ringsted
Fri fragt
Fragtprisen er baseret på levering til postnr.: 4140 - Borup skift postnr.
Angiv postnr til levering: Gem
DKK 1.263,00
ex. moms 1.010,40
Total inkl. fragt 1.462,00
The analog encoder is used for manual control variable settings for example for mixing valves, valve positions, temperature values etc. The module can be controlled in two operating modes that are set by means of the three level switch (on, off, auto) on the front. The switch position is confirmed via the two external control contacts b1 and b2.
Switch position on
the control variable can be set with the potentiometer on the front. The output signal 0 to 20 ma is available at contact y. The current flow at input yr is not interrupted when the switch is in position on or off.
Switch position auto
the input current (yr) is transmitted to the control variable output y with a tolerance of ±5 % (full scale value).
Connection by spring clamp terminal blocks (push-in)
setpoint generator
manual control level with checkback function
led brightness proportional to control variable