DKK 0,00
(fragt pris: 0,00)
ABUS RM1100, 160 g, 100 x 100 x 46 mm, 0 - 95%, -10 - 50 °C, 10.5–13.8V DC, Hvid
Varenr.: [10719118] | Producent: ABUS | Model-nr.: GUD-7312 | EAN: 4043158001303
Fjernlager (14-21 hverdage)
Varen er på fjernlager, leveringstiden er 14-21 hverdage. Mere info
Leveringsmuligheder - Vælges ved checkout
Instabox - Pakkeboks
39,00
GLS - Pakkeshop
39,00
DAO - Hjemmelevering om natten og i de tidlige morgentimer
Perfekt til arbejdsdage - Levering inden kl. 06:00 - Klar når du vågner
45,00
GLS - Levering til hoveddøren
59,00
Afhentning i vores Pick-up point i Ringsted
19,00
Vis alle leveringsmuligheder (5)
DKK
821,00
ex. moms 656,80
Total inkl. fragt
860,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
- For connecting to alarm systems
- Detects temperature changes: 3°C within one minute
- Detects maximum temperature: 60°C
- Can be used in humid spaces
The 12 V raise of heat detector detects incipient fires. It reacts to an excessive maximum temperature and a sudden temperature rise. These indicators are reliably detected and reported to the alarm centre.
The 12 V raise of heat detector is mounted on the ceiling in the centre of the room. The minimum distance to the side wall should be 30cm. Since the 12 V raise of heat detector does not detect smoke (as opposed to optical smoke detectors), it is used mainly in places with high dust and smoke pollution (kitchens, smoke rooms, garages). The detector triggers an alarm when the maximum temperature of 57 degrees is exceeded or when the temperature rises more than 5 degrees with 3 minutes. By changing a jumper, you can configure it as NO or as NC detector. It is therefore suitable for every wired alarm system. The 12 V raise of heat detector is supplied externally with 10-15V operating voltage and is EN54 certified.
- Detects temperature changes: 3°C within one minute
- Detects maximum temperature: 60°C
- Can be used in humid spaces
The 12 V raise of heat detector detects incipient fires. It reacts to an excessive maximum temperature and a sudden temperature rise. These indicators are reliably detected and reported to the alarm centre.
The 12 V raise of heat detector is mounted on the ceiling in the centre of the room. The minimum distance to the side wall should be 30cm. Since the 12 V raise of heat detector does not detect smoke (as opposed to optical smoke detectors), it is used mainly in places with high dust and smoke pollution (kitchens, smoke rooms, garages). The detector triggers an alarm when the maximum temperature of 57 degrees is exceeded or when the temperature rises more than 5 degrees with 3 minutes. By changing a jumper, you can configure it as NO or as NC detector. It is therefore suitable for every wired alarm system. The 12 V raise of heat detector is supplied externally with 10-15V operating voltage and is EN54 certified.