DKK 0,00
(fragt pris: 0,00)
MakerBot - Ægte blå - 907 g - PLA-filament (3D) - for Replicator Fifth Generation, Z18
Varenr.: [1706833] | Producent: Makerbot | Model-nr.: MP05776 | EAN: 0817913011043
Ikke på lager
Varen er ikke på lager. Mere info
Udsolgt
Varen er ikke på lager.
Brug funktionen ”Giv mig besked..." herunder for opdateringer.
Leveringsmuligheder - Vælges ved checkout
Instabox - Pakkeboks
39,00
GLS - Pakkeshop
39,00
DAO - Hjemmelevering om natten og i de tidlige morgentimer
Perfekt til arbejdsdage - Levering inden kl. 06:00 - Klar når du vågner
45,00
GLS - Levering til hoveddøren
59,00
Afhentning i vores Pick-up point i Ringsted
19,00
Vis alle leveringsmuligheder (5)
DKK
545,00
ex. moms 436,00
Total inkl. fragt
584,00
Giv mig besked når varen er på lager igen
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
MakerBot PLA Filament is the best and most consistent filament for the MakerBot Replicator 2 Desktop 3D Printer. MakerBot PLA Filament is a bioplastic derived from corn. It's guaranteed not to have any heavy metals, phthalates or BPA.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of printing. MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints.
MakerBot PLA Filament adheres well to acrylic and to blue painter's tape. Prints with a large bottom layer may have a tendency to curl.
Every filament color is comprehensively quality tested at both 100-micron and 200-micron layer resolutions on the MakerBot Replicator 2 to verify that the filament will perform every feature that MakerBot MakerWare software offers and reliably slice and print every type of printing. MakerBot PLA Filament is a good material to start with because it's easy to use and performs well on most prints.
MakerBot PLA Filament adheres well to acrylic and to blue painter's tape. Prints with a large bottom layer may have a tendency to curl.