DKK 0,00
(fragt pris: 0,00)
PureLink SE-SP011-030, 30 m, Hvid, Kobber, 2,5 mm
Varenr.: [24248380] | Producent: Purelink | Model-nr.: SE-SP011-030 | EAN: 4260194576408
Fjernlager (2-3 hverdage)
Varen er på fjernlager, leveringstiden er 2-3 hverdage. Mere info
Leveringsmuligheder - Vælges ved checkout
Instabox - Pakkeboks
39,00
GLS - Pakkeshop
39,00
DAO - Hjemmelevering om natten og i de tidlige morgentimer
Perfekt til arbejdsdage - Levering inden kl. 06:00 - Klar når du vågner
45,00
GLS - Levering til hoveddøren
59,00
Afhentning i vores Pick-up point i Ringsted
19,00
Vis alle leveringsmuligheder (5)
DKK
537,00
ex. moms 429,60
Total inkl. fragt
576,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
With the OFC speaker cables from Sentivus, you can be sure that the cables are made of 99.99% OFC copper, have very good conduction and transmission qualities and have also been processed according to high quality standards in Germany.
The OFC copper conductors can convince with a high flexibility and a low line resistance.
OFC - 99,9% pure copper, free of oxygen (Oxygen Free Copper)
A pure copper cable - Made in Germany
The great advantages of pure OFC (oxygen free copper) cables are their excellent electrical properties as well as the low line resistance.
Often, speaker cables are called "pure" copper cables, although they have only a very thin copper coating.
This mainly concerns the as "CCA copper" (Aluminum core with a thin copper coating) or "CCS copper" (Steel cable with a thin copper coating).
These cables have far worse transmission characteristics than OFC cables!
Different wire sizes, depending on requirements
In general, the longer the loudspeaker cable, the greater the loss of power, which is however only noticeable in the loudness of the signal at the loudspeaker end.
Since a power loss can be counteracted with an increase in the cable cross-section, it is useful to use cables with differentwire sizes, depending on the cable length (for example, a larger cross-section for the rear speakers of a surround installation).
With a length of 10m, the power losses are approximately:
- 0,75mm² cable: 5,25%
- 1,5mm² cable 3,13%
- 2,5mm² cable 1,63%
- 4mm² cable 1,00%
This cable (2.5mm²) is available in the following lengths:
10m / 15m / 20m / 25m / 30m / 50m / 100m
Under SE-SP-010 you will find the same cables with transparent sheathing.
The OFC copper conductors can convince with a high flexibility and a low line resistance.
OFC - 99,9% pure copper, free of oxygen (Oxygen Free Copper)
A pure copper cable - Made in Germany
The great advantages of pure OFC (oxygen free copper) cables are their excellent electrical properties as well as the low line resistance.
Often, speaker cables are called "pure" copper cables, although they have only a very thin copper coating.
This mainly concerns the as "CCA copper" (Aluminum core with a thin copper coating) or "CCS copper" (Steel cable with a thin copper coating).
These cables have far worse transmission characteristics than OFC cables!
Different wire sizes, depending on requirements
In general, the longer the loudspeaker cable, the greater the loss of power, which is however only noticeable in the loudness of the signal at the loudspeaker end.
Since a power loss can be counteracted with an increase in the cable cross-section, it is useful to use cables with differentwire sizes, depending on the cable length (for example, a larger cross-section for the rear speakers of a surround installation).
With a length of 10m, the power losses are approximately:
- 0,75mm² cable: 5,25%
- 1,5mm² cable 3,13%
- 2,5mm² cable 1,63%
- 4mm² cable 1,00%
This cable (2.5mm²) is available in the following lengths:
10m / 15m / 20m / 25m / 30m / 50m / 100m
Under SE-SP-010 you will find the same cables with transparent sheathing.