DKK 0,00
(fragt pris: 0,00)
Kurth Electronic KE7010, Blå, 6 V, -5 - 50 °C, -25 - 75 °C, 0 - 90%, 380 g
Varenr.: [24549977] | Producent: KURTH | Model-nr.: D701B | EAN: 4012932135947
Fjernlager (14-21 hverdage)
Varen er på fjernlager, leveringstiden er 14-21 hverdage. Mere info
Leveringsmuligheder - Vælges ved checkout
Instabox - Pakkeboks
39,00
GLS - Pakkeshop
39,00
DAO - Hjemmelevering om natten og i de tidlige morgentimer
Perfekt til arbejdsdage - Levering inden kl. 06:00 - Klar når du vågner
45,00
GLS - Levering til hoveddøren
59,00
Afhentning i vores Pick-up point i Ringsted
19,00
Vis alle leveringsmuligheder (5)
DKK
780,00
ex. moms 624,00
Total inkl. fragt
819,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
The KE7100 LANcheck is the light version of the top of the line model KE7200 Ethernet Performance Tester and is an easy-to-use tool for verification and troubleshooting in small and big networks.
Wire mapping including fault location and detection of split pairs, TDR length measurement and Power over Ethernet Test.
KE7100 tests for wire continuity, opens, shorts, miswires and split pairs and shows test results on the easy to read graphical display with backlight. The length of the cable and distance to fault (short or open) is also shown by the KE7100.
The KE7100 can perform a Power over Ethernet Test (IEEE802.3af). KE7100 not only checks for ability of Power over Ethernet, it detects the type available and what power level is supported. PoE is appearing more commonly as devices like wireless access points (WAP), IP cameras and IP telephones grow in popularity. Mismatches between equipment and power supply can cause a variety of problems.
KE7100 offers predefined wiring schemes, user settable via device.
Wire mapping including fault location and detection of split pairs, TDR length measurement and Power over Ethernet Test.
KE7100 tests for wire continuity, opens, shorts, miswires and split pairs and shows test results on the easy to read graphical display with backlight. The length of the cable and distance to fault (short or open) is also shown by the KE7100.
The KE7100 can perform a Power over Ethernet Test (IEEE802.3af). KE7100 not only checks for ability of Power over Ethernet, it detects the type available and what power level is supported. PoE is appearing more commonly as devices like wireless access points (WAP), IP cameras and IP telephones grow in popularity. Mismatches between equipment and power supply can cause a variety of problems.
KE7100 offers predefined wiring schemes, user settable via device.