Black Box ClimateCab - Rack air-conditioning køle system

Control heat and humidity in your ClimateCab Cabinet. These models are perfect for harsh environments and remote locations without cooling infrastructure. Air-Conditioning units keep equipment cool even with temperatures up to 55 degree C. A closed-loop cooling system recirculates air in the cabinet and keeps outside air out while an internal evaporator eliminates condensation.

Cabinet sides are pre-machined to match the air conditioner. The sides are fixed to the cabinet using screws and a rubber gasket. Sturdy handles and hooks at the base of the side panel reduce the physical effort required to fit the air conditioner. Sealing gaskets supplied with the air conditioner are inserted around the edges of both apertures. No specialist tooling or skills are required to install the Climatecab Server Cabinet.

The air conditioner can be run with no special controls set however the settings may be modified to accommodate most applications by removing a panel and adjusting three DIP switches. A 5-wire connection block is supplied for wiring to a door open switch or alarm panel. Door Open A pair of connections may be used to stop the air conditioner from operating when the door is open. This prevents condensed water from collecting on the cold plates of the air conditioner.

A pair of volt free contacts can be used to signal an alarm condition. Typically this is an over-temperature and a pair of DIP switches enable the setting of the threshold for temperatures over 45 - 50 - 55 or 60 degree C. The connector block to attach the alarm and door open wires is included in the pack.

The internal temperature of the cabinet may be set to 25 - 30 - 35 or 40 degree C by changing the position of the three DIP switches.