DKK 0,00
(fragt pris: 0,00)
Hoffman MAS0302515R5, 250 mm, 155 mm, 300 mm, 4,54 kg, 1 stk
Varenr.: [5063706] | Producent: Hoffman | Model-nr.: MAS0302515R5 | EAN: 8713574129030 | UNSPSC.: 39121321 | EL-nr.: 7812251338
Fjernlager (1-2 hverdage)
Varen er på fjernlager, leveringstiden er 1-2 hverdage. Mere info
Leveringsmuligheder - Vælges ved checkout
Instabox - Pakkeboks
39,00
GLS - Pakkeshop
39,00
DAO - Hjemmelevering om natten og i de tidlige morgentimer
Perfekt til arbejdsdage - Levering inden kl. 06:00 - Klar når du vågner
45,00
GLS - Levering til hoveddøren
59,00
Afhentning i vores Pick-up point i Ringsted
19,00
Vis alle leveringsmuligheder (5)
DKK
478,00
ex. moms 382,40
Total inkl. fragt
517,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
For outdoor installation, the use of a rain hood ARF and 100% polyester paint coating is recommended
Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure
Door: Surface mounted with 130-degree opening; concealed removable hinges with captive pin
Door: Hinges can be mounted to allow left or right hand opening
Door: inner M6 welded studs to mount door profiles MMDP
Door: Sealing is ensured by an injected one piece polyurethane gasket
Lock: Customized lock with double-bit for easy opening of the door
Gland plate: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier
Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment
Mounting plate: On the top and bottom there are holes to facilitate cable fixing
Mounting plate: All sides, from 800 mm and above, are strengthened by folded edges
Delivery: Enclosure with door and mounting plate; for height 600 mm and above, two door mounting profiles; gland plate(s) with gasket(s), plastic double-bit 3 mm key, mounting accessories, metallic key, for height 1000 mm and above
Body: Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter × 2 mm depressions, to allow air circulation around the rear part of the enclosure
Door: Surface mounted with 130-degree opening; concealed removable hinges with captive pin
Door: Hinges can be mounted to allow left or right hand opening
Door: inner M6 welded studs to mount door profiles MMDP
Door: Sealing is ensured by an injected one piece polyurethane gasket
Lock: Customized lock with double-bit for easy opening of the door
Gland plate: Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier
Mounting plate: The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment
Mounting plate: On the top and bottom there are holes to facilitate cable fixing
Mounting plate: All sides, from 800 mm and above, are strengthened by folded edges
Delivery: Enclosure with door and mounting plate; for height 600 mm and above, two door mounting profiles; gland plate(s) with gasket(s), plastic double-bit 3 mm key, mounting accessories, metallic key, for height 1000 mm and above