DKK 0,00
(fragt pris: 0,00)
ABUS AZBW10000, Passiv infrarød (PIR) sensor, Ledningsført, 15 m, 15 kg, Væg, Indendørs
Varenr.: [8103676] | Producent: ABUS | Model-nr.: AZBW10000 | EAN: 4043158196696
Fjernlager (14-21 hverdage)
Varen er på fjernlager, leveringstiden er 14-21 hverdage. Mere info
Leveringsmuligheder - Vælges ved checkout
Instabox - Pakkeboks
39,00
GLS - Pakkeshop
39,00
DAO - Hjemmelevering om natten og i de tidlige morgentimer
Perfekt til arbejdsdage - Levering inden kl. 06:00 - Klar når du vågner
45,00
GLS - Levering til hoveddøren
59,00
Afhentning i vores Pick-up point i Ringsted
19,00
Vis alle leveringsmuligheder (5)
DKK
270,00
ex. moms 216,00
Total inkl. fragt
309,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
PIR detector: Unobtrusive, effective, power-saving:
The wire motion detector is equipped with a passive infrared sensor (PIR). It detects human-induced heat movements in its detection field and reports any event to the alarm control panel.
Optional PET Immunity: For your beloved pet.
Optional "pet-immune" function, individually adjustable to 3 levels: distinguishes between humans and animals: Moving persons are reliably detected while pets weighing up to 15 kg are ignored. In rare individual cases, however, a lighter animal can also trigger the detector, e.g. if it moves close to the detector, jumps or flies. The ability to optionally configure animal immunity on the detector reduces complexity in planning, installation, and inventory management.
Technology and installation:
Optimal mounting location is in a corner, about 1.80 to 2.40 meters above the floor. The expected direction of travel of an intruder should be across the detector. The viewing angle is approximately 90 degrees, and the detection range (depending on the mounting height) is up to 18 x 18 meters. Thanks to the new spherical lens design, the detector detects even more reliably and offers significantly more uniform coverage. Thanks to integrated anti-creep protection, the detector has no blind spot and also detects persons directly below its mounting position. Use the jumper to set the sensitivity of the detector. With its integrated, common resistor combinations, which are configured by means of jumpers, the wiring to the alarm control panel is flexible and quick.
The wire motion detector is equipped with a passive infrared sensor (PIR). It detects human-induced heat movements in its detection field and reports any event to the alarm control panel.
Optional PET Immunity: For your beloved pet.
Optional "pet-immune" function, individually adjustable to 3 levels: distinguishes between humans and animals: Moving persons are reliably detected while pets weighing up to 15 kg are ignored. In rare individual cases, however, a lighter animal can also trigger the detector, e.g. if it moves close to the detector, jumps or flies. The ability to optionally configure animal immunity on the detector reduces complexity in planning, installation, and inventory management.
Technology and installation:
Optimal mounting location is in a corner, about 1.80 to 2.40 meters above the floor. The expected direction of travel of an intruder should be across the detector. The viewing angle is approximately 90 degrees, and the detection range (depending on the mounting height) is up to 18 x 18 meters. Thanks to the new spherical lens design, the detector detects even more reliably and offers significantly more uniform coverage. Thanks to integrated anti-creep protection, the detector has no blind spot and also detects persons directly below its mounting position. Use the jumper to set the sensitivity of the detector. With its integrated, common resistor combinations, which are configured by means of jumpers, the wiring to the alarm control panel is flexible and quick.