DKK 0,00
(fragt pris: 0,00)
Alphacool 11641, Slangeskæretang, Sort
Varenr.: [9754069] | Producent: Alphacool | Model-nr.: 11641 | EAN: 4250197116411
Fjernlager (14-21 hverdage)
Varen er på fjernlager, leveringstiden er 14-21 hverdage. Mere info
Leveringsmuligheder - Vælges ved checkout
Instabox - Pakkeboks
39,00
GLS - Pakkeshop
39,00
DAO - Hjemmelevering om natten og i de tidlige morgentimer
Perfekt til arbejdsdage - Levering inden kl. 06:00 - Klar når du vågner
45,00
GLS - Levering til hoveddøren
59,00
Afhentning i vores Pick-up point i Ringsted
19,00
Vis alle leveringsmuligheder (5)
DKK
168,00
ex. moms 134,40
Total inkl. fragt
207,00
Funktionen kræver at man er logget ind. Opret en bruger og brug vores smarte liste system til at holde styr på fremtidige indkøb, faste indkøb eller ønskelister.
Opret bruger
Login
Opret bruger
Login
Send på mail
The Alphacool Eistools Modding Cutter is a versatile tool that can be used for many jobs. You can cut the Alphacool Eistubes PETG HardTubes as well as standard soft tubing. Thanks to the adjustable angle, the Eistools Modding Cutter can also be used for other jobs whilst modding.
PETG Tube No Longer Sawed?
The Alphacool PETG Eistubes are relatively soft for HardTubes and can therefore not only be bent at relatively low temperatures, they can also be cut perfectly with the Eistools Modding Cutter. The tube is placed on the protractor and then simply cut as if with scissors. The procedure is just as easy with normal hoses.
But What's with the Angles?
Those who want to up their game with some modding will not only use HardTubes, but also change various things on the case and other components. There are a lot of things that must be cut. Cable sleeving, insulation, LED Strips and various caps to cover certain parts in the PC and much more. Here one often needs perfect angled cuts.
How to Use the Angle?
The support surface is generously chosen and the angle can be adjusted up to a cutting edge of 45°. This is done in 15° steps, whereby the angle always engages cleanly and thus remains in position.
The Blade Is Blunt, What Now?
It is important to keep the blade sharp, so of course, you can change the blade. All you need to do is loosen a screw on the side. An 8 mm open-end wrench is recommended. Then you can replace the blunt blade with a new one. The replacement blades are of course also available from Alphacool. The replacement blades for the Eistools Modding Cutter can be found under manufacturer number 11642.
The Eistools Modding Cutter is a multi-use tool that modders and watercoolers should not be without. It is versatile and makes cutting the Eistube PETG HardTubes to size a breeze.
PETG Tube No Longer Sawed?
The Alphacool PETG Eistubes are relatively soft for HardTubes and can therefore not only be bent at relatively low temperatures, they can also be cut perfectly with the Eistools Modding Cutter. The tube is placed on the protractor and then simply cut as if with scissors. The procedure is just as easy with normal hoses.
But What's with the Angles?
Those who want to up their game with some modding will not only use HardTubes, but also change various things on the case and other components. There are a lot of things that must be cut. Cable sleeving, insulation, LED Strips and various caps to cover certain parts in the PC and much more. Here one often needs perfect angled cuts.
How to Use the Angle?
The support surface is generously chosen and the angle can be adjusted up to a cutting edge of 45°. This is done in 15° steps, whereby the angle always engages cleanly and thus remains in position.
The Blade Is Blunt, What Now?
It is important to keep the blade sharp, so of course, you can change the blade. All you need to do is loosen a screw on the side. An 8 mm open-end wrench is recommended. Then you can replace the blunt blade with a new one. The replacement blades are of course also available from Alphacool. The replacement blades for the Eistools Modding Cutter can be found under manufacturer number 11642.
The Eistools Modding Cutter is a multi-use tool that modders and watercoolers should not be without. It is versatile and makes cutting the Eistube PETG HardTubes to size a breeze.